Tesla Model 3 (incl.2024 Highland) : Rubber Seal Strips for Doors+ Frunk+ Trunk
€44.90
incl. VAT for EU countries, shipping cost calculated during checkout.
Important Note: Do not install this product wheh the temparture is below 10 degree C, otherwise surfaces shall be pre-heated before installation. The wind noise and dirt on the sills can be reduced by applying the rubber insulation strips.
In stock
- Express shipping from our Dutch warehouse, delivery to BENELUX / Germany in 1-2 days, other EU countries in 3-6 days.
Shop the Tesla Model 3 (incl.2024 Highland): Rubber Seal Strips Set for Overall Protection and Noise Reduction (4 Doors, AB Pillar, Frunk and Trunk) from Plugear. Important Note: Do not install this product wheh the temparture is below 10 degree C, otherwise surfaces shall be pre-heated before installation.
Key features and benefits:
- The wind noise and dirt on the sills can be reduced by applying the rubber insulation strips.
- They also ensure that the doors can close more securely.
- The set includes rubber seal strips for: Frunk Trunk 4 doors A-pillars and B-pillars Note: This product is not suitable for waxed or ceramic coated surfaces, the tape may get loose due to the additional coating layer.
Check the product details and vehicle compatibility before ordering. This accessory is selected to make everyday driving more comfortable, protected, and convenient.
7 reviews for Tesla Model 3 (incl.2024 Highland) : Rubber Seal Strips for Doors+ Frunk+ Trunk
You must be logged in to post a review.
Installation Guide
No installation guide available.
Shipping Zones, Duration and Costs
We deliver our products globally, and the shipping costs and duration of transportation are indicated as follows:
|
Region/Country |
Order Value |
Shipping Cost |
Shipment Duration* |
|---|---|---|---|
|
Netherlands |
Below€ 70 |
€ 6.95 |
Next working day (incl. Saturday) delivered. |
|
Above € 70 |
Free |
||
|
Other EU countries |
Below€ 70 |
€ 8.50 |
Belgium, Luxemburg: 1-2 working days Germany, UK, Denmark: 2-3 working days France, Sweden, Ireland: 2-4 working days Spain, Portugal, Austria, Italy, Finland: 3-5 working days |
|
€ 70 to€ 120 |
€ 6.00 |
||
|
Above€ 120 |
Free |
||
|
Rest of the world |
Below€ 80 |
€ 10.00 + € 15.00 (customs fee) |
Norway: 2-4 working days Switzerland: 2-3 working days Iceland: 4-7 working days For other countries, please follow the track and trace code provided. |
|
€ 80 to€ 180 |
 € 5.00 + € 15.00 (customs fee) |
||
|
Above€ 180 |
€ 10.00 (customs fee) |
Note:
*: You will receive a confirmation e-mail which include a tracking code or a direct tracking link. Please refer to the e-mail for the exact delivery time of your order. Duration indicated in table above is indicative during normal operation period (e.g. during holiday season or peaks of the covid-19 pandemic, the duration will not be guaranteed.)
**:Â Shipping costs indicated in table above do not apply to over-sized products (e.g. front bumper, body kits), for these over-sized products, the shipping costs will be indicated during the checkout process.
If you have any question, please contact us.
YOU MAY ALSO LIKE…
Tesla Model S/3/X/Y: Side Fender Vent Camera Trim (Genuine Carbon Fiber Collection)
Make your Tesla more stylish and unique by simply installing this Genuine Carbon Fiber camera trim. Easy installation by pre-installed 3M double-sided tapes, and can be removed without any damage to the original camera cover.
Tesla Model S/3/X/Y: Lifting Rubber Adaptors (4 pieces)
Tesla Model S/3/X/Y: SpaceX Logo Decals
SpaceX decals Special for Tesla Model S 3 X Y. Easy to Install: The Chrome Trunk Sticker is affixed with high strength automotive adhesive and requires no tools, no drilling and very simple placement.Can be applied to any clean flat surface -vehicles, car doors, car body ,car...
Tesla Model S/3/X/Y: Welcome Door Projector Puddle Light Set
Tesla Model S/3/X/Y: Industrial-grade SLC Sentry Mode USB Flash Drive (pre-formatted for DIRECT use)
SLC USB stands for Single-Level Cell, which is normally used in industrial grade applications. SLC is >100 times more reliable than conventional TLC NAND USB flash drives which is the perfect choice for recording Tesla footages.
RELATED PRODUCTS
Tesla Model S/3/X/Y: Welcome Door Projector Puddle Light Set
CCS Charging Port Waterproof Cover
Tesla Model 3: Rear Side Window Louver Cover
Protect your rear side windows of your Model 3 from breaking in, also provide the car a stylish look. Made of High-Quality ABS with smooth surface finished for long-lasting and durable, keep color from deterioration or discoloration.
Model 3: Mini Fender Mud Flaps
Want to protect the paint from mud and sand, but don't like the look of conventional mud flaps? This is the product for you.
Tesla Model 3 and Model Y: Seat Back Set (Genuine Carbon Fiber Collection)
For every car modification, genuine carbon fiber is the ultimate for both appearance and performance. These seat back trims are made of genuine dry carbon fiber, they are hand-made by experienced craftman for the perfect fit.

Walter –
Absolutely satisfied with the quality of this product! At first I was a bit skeptical about the noise cancelling it would provide my car, but after installing it I am sold!
Paul –
actually helped quite a lot! just takes some time to install the fuckers
Jenny –
Easy and good quality product, like it!
Jan vdb –
Nam wel wat tijd in beslag met installeren, maar opzich te doen en helpt zeker.
Katja –
happy my friend recommended this!
courtney singleton –
very nice and ez to install
Ivo gagas –
quality is very well made